User Manual

Last
update:
2017/11/08
15:11
torpedo_studio:torpedo_studio_user_s_manual http://wiki.two-notes.com/doku.php?id=torpedo_studio:torpedo_studio_user_s_manual
http://wiki.two-notes.com/ Printed on 2017/11/10 22:17
4. Validation switch
5. Escape switch
6. Navigation encoder
7. POST FX bypass
8. POST FX menu
9. Simulation bypass
10. Virtual miking menu
11. Power amp, speaker and microphone menu
12. Compare switch
13. Program menu
The Torpedo Studio control panel includes the various knob and switch controllers that give access to
the machine and/or sound parameters.
You can access any menu by pressing the corresponding switch. By pressing once you will access the
last channel you edited, either A or B. Pressing a second time will give you the other channel, and A
and B will alternate every time you click.
The last channel you edited is stored in memory. In other words, if after editing the channel B MIKING
you click once on Post FX, you will stay in channel B, and you will have to click twice to get the
channel A.
The navigation encoder has various functions:
browsing the presets if you are on the PERFORM screen
browsing the parameters if you are on a menu screen
modifying the parameter that you have selected.
To access any given parameter setting or to validate it, press the “OK” switch. To cancel any change
made to the parameter setting, or to go back to selecting parameters, press the “ESC” switch.
5.4 SETUP
The SETUP menu is where you will configure the unit. The parameters that are set up here will apply
to all the presets and be retained when the Torpedo Studio is turned off.
5.4.1 Audio
Input Select: Select the input you want to activate for processing. The various routing options