User Manual

Configuring and using the TORPEDO PI-101 - Wall of Sound Edition
3 Routing of the PI-101: mono track
If you insert the plugin on a mono track (in other words, mono in/mono out), the channels will take the same
input and process it in parallel.
Nevertheless, as the output is mono, the PAN parameter on every channel is deactivated.
Figure 4.3: On a mono track
If you have several mono tracks, always think about the possibility to send them to a stereo bus. For example,
you could have your left and right guitars sent to the left and right channels of one PI-101 WoS by simply panning
the individual tracks left and right. What you will see is that the guitars sent to the left channel of the plugin will
be processed on the left part of the channels area on the PI-101, and the guitars sent to the right channel of the
plugin will be processed on the right part of the channels area.
4 General controls
• You can change the parameters of the TORPEDO PI-101 - Wall of Sound Edition either by clicking on the
controls, pointing at a parameter and moving the mouse wheel or double clicking to enter a value.
• "alt"+click on a potentiometer to reset its value to the default value.
• On the "studio window", simply click on the microphone to move it into the room.
5 Input gain and output volume controls
Those potentiometers control the input gain and the output volume of
the plugin. It is absolutely critical to avoid any saturation of the input or
output signals at the risk of considerably reducing the audio quality.
Two Notes Audio Engineering Torpedo PI-101 14