User Manual
Table Of Contents
- English - User's manual
- Français - Manuel de l'utilisateur
- Consignes de sécurité
- Déclaration de conformité
- Service Après Vente (SAV)
- Introduction à la série Le Preamp
- Quel Le Preamp est fait pour vous ?
- Description du produit
- Précisions sur le mode Fusion
- Le Mid Sweep
- Connexions
- Et si je veux utiliser plusieurs Le Preamp ?
- Trucs & astuces
- Le plugin Torpedo Wall of Sound III
- MIDI
- Specifications
English - User’s manual
13.6 PC number
Your Le Preamp sends a PC every time you press either A, B or A + B. You can select the MIDI PC
number sent by the A switch, that we call "x". "x" is a number between 1 and 125. The other PCs sent
by the other switches are deducted from "x", following this rule:
Channel A B Cold Fusion Hot Fusion
PC number x x+1 x+2 x+3
Press the A switch to add 10 to "x" and B to add 1. The PC number is displayed using A and B LEDs
flashing. A indicates the decade and B the unity. For example, A flashing 11 times and B flashing 8
times means PC118.
13.7 Multi-channel Mode
The Multi-channel mode can be either ON (green tube window) or OFF (LEDs red tube window).
Press A to change this parameter.
13.8 Factory Reset
The factory reset will bring back the Le Preamp MIDI configuration to its initial state. Once you
entered that page, the tube window LEDs will flash in blue. Press simultaneously the A and B switches
to reset your Le Preamp. Once the reset is done, Le Preamp will reboot.
13.9 Firmware version
The firmware version number is displayed using A and B LEDs flashing. A indicates the decade and
B the unity. For example, A staying off and B flashing 3 times means firmware V03.
Two notes Audio Engineering Le Preamp 19