Owner manual

ITBR001-244 www.twobros.com 2009-2010 Yamaha WR250 X/R - 5
Figure GFigure HFigure I
11. Attach the connectors from the Juice Box Pro to the stock injector and the stock
wiring harness as shown in Figure G.
12. Locate the Throttle Position Sensor (TPS) connector.
The TPS connector is covered with a black rubber boot and is located on the right
hand side of the throttle body as shown in Figure H.
13. Unplug the TPS connector as shown in Figure H.
14. Attach the connectors from the Juice Box Pro to the stock TPS connector and the
stock wiring harness as shown in Figure I.
unplug