User Manual

 
 
      

 


  
   
b
A B
D
C
E
F G
------ THE WING ------
 Gently bend all the control
surfaces back and let them sit like
this for about an hour
 Locate the two longest and largest
spars,1x5x950mm, and the
smaller one that is .5x3x200mm
 Apply a medium layer of FoamTac
to the mating edges of the wing
halves
 Once the glue is tacked up, bring
the two pieces together making
sure the alignment nubs are
locating everything perfectly
 Start with the .5x3x200mm spar
 Wipe it down with alcohol
 Test fit it into the reward slot on
the bottom side of the wing and
secure with thin CA