User Manual

j k
l m
n o n o p o q
p
q n
p
l
o q r
s r t k
v o
A B
D
C
------ RADIO BAY (con’t) ------
 Fit the main tray piece to the cross
members, make sure all the tabs are
fully engaged
 Secure the main tray and cross
members together with a drop of thin
CA in the tabbed areas
 Secure the tray to the fuselage with
thin CA where the tabs stick thru the
foam. NOTE - you can leave these
tabs “unglued” if you want a
“removable” radio tray. It fits tight
enough into the fuselage that glue is
not necessary.
 Install the four servos as shown.
Aileron servos near the wing saddle
will be flush to the INSIDE, and their
arms will face outward. Tail servos
down in the “V” will be flush to the
OUTSIDE and their arms are facing
inward. DO NOT GLUE THE SERVOS
IN AT THIS TIME.