User Manual

 
 
      

 


  
   
 W
A B
D
C
E
F G
------ WHEEL / AXLES/ HUBS ------
 For best strength and longevity, use
FoamTac for attaching the axle hubs
 Put some glue in the grooves
 Coat the spars
 Join the two pieces as shown and
add a filet of glue all around the base
of where the two pieces meet. Make
sure the spars are flush and that the
axle hub is firm against the bottom
edge of the landing gear strut
 Repeat for the other side. Let this
assembly dry at least overnight before
attempting to attach the wheels
 Insert a cap screw thru the wheel and
thread into the axle hub. Note that it
may be a little tight, so work the
screw in gently by going in and out a
little at a time.
 ... and repeat for the other side