User Manual

 
 
      

 


  
   
 
A B
D
C
E
F G
------ MAIN FUSELAGE (con’t) ------
 Check that the fuselage is square all
along the length nose to...
 ... tail
 From the underside, specifically
check that all the spars for the
landing gear struts are flush
 When satisfied, secure the one that
have not been glued yet with some
thin CA
 Repeat step C for the area of the tail
section where the spars comes thru
 Repeat step D for the tail
 Do one last double check with your
builder square to make sure
everything is nice and square and set
aside for now to let the glue cure up.
MAIN FUSELAGE STRUCTURE IS NOW
COMPLETE