User Manual

 
 
      

 


  
   
 
A B
D
C
E
F G
------ MAIN FUSELAGE (con’t) ------
 Fully seat the spars land gear struts
into their slots, make sure they are
flush
 Check to make sure the two fuselage
members are square to each other in
and around the landing gear strut
area
 Fully seat the tail spars into their
slots, make sure they are flush
 Check to make sure the two fuselage
members are square to each other in
and around the tail section
 TEST FIT UP is essentially done, have
a look at the whole thing and make
sure it all looks nice and square
 Take is all apart, remember how it
had all been test fit assembled
TEST FIT IS DONE - TIME FOR GLUE
 Apply glue as shown to all mating
surfaces