User Manual

 
 
      

 


  
   
 a
A B
D
C
E
F G
------ MAIN FUSELAGE (con’t) ------
 Use the “tack” method and attach the
tail piece shown, only apply the glue
on the foam-foam part of the joint
 Hold pressure for a minute or so
 Secure the carbon-foam part of the
joint with thin CA and kicker
 Finished parts
THIS IS WHERE TEST FITTING
STARTS - DO NOT USE GLUE UNTIL
CALLED FOR
 Take the fuselage piece with the spars
sticking ut and thread the ends thru
the other fuselage part
 All the way thru...
 .... and line up the tabs