User Manual

 
 
      

 


  
   
 W
A B
D
C
E
F G
------ MAIN FUSELAGE (con’t) ------
 Find the rudder piece shown that
is keyed to fit the fuselage on that
side
 Using the “tack” method attache the
two pieces
 Locate the shorter spars from the set
pictured above (.5x3x250mm)
 Wipe it down with alcohol to remove
any mfg residue
 Test Fit and clean up the slot if
needed
 Install / Insert
 Constrain flat and secure the spar
and control surface together with
some thin CA and kicker