User Manual

 
 
      

 


  
   
 
A B
D
C
E
F G
------ THE WING (con’t) ------
Wipe down the two main spars with
alcohol before fitting
 Test fit the rear main spar so that
it is flush with the surface
 Install the rear main spar,
pushing it flush to the wing
surface for the how length
 Repeat the process with the forward
main spar
 Secure the wing and spars flush to
the work bench with some weights
 Glue all the three of the spars to
the wing with some thin CA, don't
hit with kick yet
 Let the whole assembly sit for a
couple minutes to all the CA to
soak in, then hit with kicker
 Locate two of the four control
surface horns. All four are the
same, so any two will do