User's Manual

G245 WLAN Card
WWW.TwinMOS.COM
Page 43
User Interface Group
Select the Window User Interface by the “Language” down drop menu.
If the English item is selected, all functions of window are described with English. Select the Traditional
Chinese item, and they are described with Traditional Chinese.
Power Consumption Setting Group
which power save level want to be set by checking CAM Mode, Fast Power-Saving mode or Maximum
Power-Saving mode. The default is CAM mode. If the most save mode want to use, select the Maximum
Power-Saving mode, but it throughput is lower than CAM and Fast Power-Saving mode.
The throughput of “Fast Power-Saving mode” is better than “Maximum Power-Saving mode”, but its
power save is less than “Maximum Power-Saving mode”.
Country Roaming Group
“Country Roaming” group, the default depends on the region of EEPROM. Select other region from
“User Select” drop down menu, or check “World Mode” item to set it to the word mode. When the word
mode is set, it depends on the behavior of AP. If the WLAN card is re-plug , the setting will return to
default setting.
Fragmentation Threshold Group
The value defines the maximum size of packets, any packet size larger than the value will be fragmented.
If you have decreased this value and experience high packet error rates, you can increase it again, but it
will likely decrease overall network performance. Select a setting within a range of 256 to 2346 bytes.
Minor change is recommended.
RTS/CTS Threshold Group
Minimum packet size required for an RTS (Request To Send). For packets smaller than this threshold,
an RTS is not sent and the packet is transmitted directly to the WLAN. Select a setting within a range of
0 to 2347 bytes. Minor change is recommended.