User's Manual

G245 WLAN Card
WWW.TwinMOS.COM
Page 37
General Connection Setting Group
Select the More Setting Page to access the Configuration menu, as shown below. You can make changes
to any of the fields shown below, without the need to restart your computer.
Channel
When “Ad-Hoc ” mode is selected, the utility will provide a selection for setting the channel.When
communicating in Ad-Hoc mode, you must specify a channel on which communications will take place.
This field is grayed in infrastructure mode because the Access Point automatically selects the channel.
Tx Rate
The Transmit Rate field specifies the rate at which the radio in your G245 WLAN adapter transmits and
receives data. You can set this to the following fixed rates: 1 Mbps; 2Mbps; 5.5 Mbps; 6 Mbps; 9 Mbps;
11 Mbps; 12 Mbps; 18 Mbps; 24 Mbps; 36 Mbps; 48 Mbps or 54 Mbps.
Auto - When it is enabled, the device will choose the most suitable transmission rate automatically.
SSID
The name of the wireless network. This name cannot be longer than 32 characters. The default value is
“any”, which will automatically scan and connect the best performance Access point nearby. You may
specify a SSID for the adapter and then only the device with the same SSID can interconnect to the
adapter.