User Manual

G101/G231 Series WLAN Card
WWW.TwinMOS.COM
Page 44
SSID
The name of the wireless network. This name cannot be longer than 32 characters. The default value is
“any”, which will automatically scan and connect the best performance Access point nearby. You may
specify a SSID for the adapter and then only the device with the same SSID can interconnect to the
adapter.
Channel
When communicating in Ad-Hoc mode, you must specify a channel on which communications will take
place. This field is grayed in infrastructure mode because the Access Point automatically selects the
channel.
Desired Rate
The Transmit Rate field specifies the rate at which the radio in your G101/G231 WLAN adapter
transmits and receives data. You can set this to the following fixed rates: 1 Mbps; 2 Mbps; 5.5 Mbps; 6
Mbps; 9 Mbps; 12 Mbps; 18 Mbps; 24 Mbps; 36 Mbps; 48 Mbps or 54 Mbps.
Automatic - When it is enabled, the device will choose the most suitable transmission rate
automatically.
Apply
Click “Apply” button to save and implement the new settings.