User's Manual Part 2

G101 Series WLAN Card
Page 59
TROUBLESHOOTING
If there is any problem G101 WLAN adapter or it is required to confirm whether the adapter is installed
properly or not, the following procedure is applicable to check the various components after the adapter
has been installed. The first part suggests checking the various properties of the card for checking the
proper installation. The second part lists the various problems, which might be possibly encountered
during the installation, and provides the possible solution. Check the first part to guess the probable
reason of unsuccessful installation.
Please check the followings when encountering a problem on installing the G101, or when the G101 is
non- functional.
In Windows 2000:
To check if the G101 is installed properly, please do the following:
1. Check the Windows 2000 Diagnostics. See if there is any conflict in the Resource allocation or the
I/O Address, IRQ allocations. If it is found that the IRQ or I/O Addresses are already assigned to some
other devices, change that value.
2. Go to the Control Panel. Double click on the Network Adapter, and “
G101 Wireless Adapter” is
shown. Double clicking on that will show the status of the
G101 network adapter. If there are no error
signs, the adapter has been installed properly.
In Windows XP:
To check if the G101 is installed properly, please do the following:
1. Go to START>CONTROL PANEL. Double-click on Network Connections. Right-click on LAN.
Click Properties.
2. The
G101 network adapter will appear, indicating proper installation.