User's Manual

Octopus G Series Wireless AP
TwinMOS
Page 20
IP Address Page
This page is used to configure the parameters for local area network, which connects to the LAN port of
your Access Point. Here you may change the setting for IP address, subnet mask, DHCP, etc.
 IP Address Mode
Select 'DHCP' to get the IP settings from a DHCP server on your network. Select 'Static' to use the IP
settings specified on this page.
 Default IP Address
This is the IP address of the AP. The default IP address is 192.168.1.240.
 Subnet Mask
Type the subnet mask for the AP in the text box. The default subnet mask is 255.255.255.0
 Default Gateway
This is the IP address of the gateway that connects you to the internet.
 Access point name
This is the name that the access point will use to identify itself to external configuration and
IP-address-finding programs. This is not the same as the SSID. It is okay to leave this blank if you are
not using these programs.