User's Manual

Octopus G Series Wireless AP
TwinMOS
Page 15
 Visibility Status
When Invisibility is selected, the AP is protected against discovery by wireless sniffers, and all wireless
clients must explicitly know and use the SSID.
 Performance Mode
These profiles control a number of settings for overall wireless network usage. Their meanings are
self-explanatory.
 SSID
This is the name of the access point on the wireless network. Stations that associate to this access point
may have to know this name.
 Channel
This is the radio channel that the access point will operate on. If you experience interference (e.g. lost
connections or slow data transfers) you may need to try different channels to see which is the best.
 Transmission Rate
This is the speed at which the access point will transmit data. Normally you should select 'best' here,
although if your wireless network is unusually noisy or quiet you may which to use a fixed low or high
rate.
 Save
Click “Save” button to save and implement the new settings.
 Cancel
Click “Cancel” button to cancel the settings.
Advanced Settings Page
These settings are only for more technically advanced users who have a sufficient knowledge about
wireless LAN. These settings should not be changed unless you know what effect the changes will have
on your Access Point.