User's Manual

Octopus G Series Wireless AP
TwinMOS
Page 12
When you see the photo above then you can set the AP. The default setting below:
Wireless connecting
 Turn on power supply for Wireless AP.
 Insert 802.11b/g wireless LAN card to your PC.
 Setting your wireless utility. The SSID is “G-AP-10”, WEP off, and Infrastructure mode.
 Setting TCP/IP to work with the Wireless AP.
(Please follow LAN connecting procedure)
 Open your Web browser and type the AP`s IP address in the address bar. The AP default IP
address is
192.168.1.240. The default user name and password is null.