SD36-6905
REGISTER YOUR NEW PURCHASE online! INSCRIRE VOTRE NOUVEL ACHAT • REGISTRAR SU NUEVA COMPRA Thank you for purchasing our product. Please take a moment to visit tsicustomerservice.com to register your new purchase: Merci d’avoir acheté ce produit. Veuillez prendre un court instant pour vous rendre sur tsicustomerservice.com et enregistrer votre nouvel achat : Gracias por adquirir nuestro producto. Tómese un momento para visitar tsicustomerservice.com y registrar su nueva adquisición: tsicustomerservice.
PRODUCT DETAILS AND NOTES DÉTAILS ET NOTES DU PRODUIT/DETALLES DEL PRODUCTO Y NOTAS Place of purchase/Lieu de l’achat/Lugar de compra: Date of purchase/Date de l’achat/Fecha de compra: Model #/No de modèle/Número de modelo: Notes/Remarque/Notas: 3 SD36-6905REV1.
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Some steps are more easily handled with two adults. CAUTION • Before assembly and/or installation, carefully unwrap all parts. • Locate and set aside the hardware kit before discarding packaging. • Use care when assembling your new product. Take your time and follow assembly instructions closely. SD36-6905REV1.
K C A G E B J B I H F D 5 SD36-6905REV1.
HARDWARE/QUINCAILLERIE/FERRETERÍA AA BB CC DD [x5] [x5] [x20] [x40] Ø8x80mm PH-SD366095-AA Ø16mm PH-WSRBLK002 PH-SD366095-CC PH-KDCZNC001 EE FF GG HH [x20] [x1] [x6] [x2] Ø6.3x20mm PH-SD366095-GG PH-SD366095-HH Ø8x30mm PH-DWLNTL001 PH-SD366095-FF II JJ KK LL [x1] [x2] [x1] [x2] A6417 PH-BDRBLK004 SD36-6905REV1.
MM NN OO pp [x1] [x1] [x1] [x1] Size: 148x210mm Color: 1C (black) PH-SD366095-MM PH-SD366095-NN PH-SD366095-OO 7 PH-SD366095-PP SD36-6905REV1.
TOOLS NOT INCLUDED / OUTILLAGE NON INCLUS / HERRAMIENTAS NO INCLUIDAS tools you will need outillage nécessaire herramientas que se necesitan Drill Bit: For wood: 6 mm / 1/4 in Phillips Screwdriver Foret: Pour bois : 6 mm / 1/4 po Tournevis à tête Phillips Destornillador de punta Phillips Broca: de 6 mm para madera o Drill Perceuse Pencil Taladro Crayon Lápiz Tape Measure Ruban à mesurer Level Niveau Cinta métrica Nivel Stud Finder Détecteur de montant Localizador de montantes SD36-6905REV1.
ATTENTION: Follow instructions in the order they are given below. This will ensure that your product is properly assembled. ATTENTION : Suivre les instructions dans l’ordre donné ci-dessous. Cela vous assurera d’assembler correctement le produit. ATENCIÓN: Siga las instrucciones en el orden que se indica a continuación. Esto asegurará que su producto se ensamble correctamente.
2 A SD36-6905REV1.
3 [x4] DD FF A B B 11 SD36-6905REV1.
4 FF D C SD36-6905REV1.
5 [x4] DD C D 13 SD36-6905REV1.
6 EE FF SD36-6905REV1.
7 15 CC [x12] DD [x12] SD36-6905REV1.
8 C E F G H SD36-6905REV1.
9 FF I J 17 SD36-6905REV1.
10 [x12] DD I J SD36-6905REV1.
11 OO 19 [x1] SD36-6905REV1.
12 JJ [x2] GG [x4] MM SD36-6905REV1.
13 [x1] II Size: 148x210mm Color: 1C (black) PP [x1] Note: Door can be used with or without the included handle. If you wish to install the handle, please use the enclosed drilling template. OR 21 SD36-6905REV1.
14 NOTE: Hardware included is for drywall installation only. For all other wall types, please visit your local hardware store to obtain the proper hardware. Using a stud finder, FIND the exact location of the studs to which you want to attach the unit. MARK the right and left side to determine the center of each stud. À l’aide d’un détecteur de montant, TROUVER l’emplacement exact des montants sur lesquels doit être attaché.
15 NOTE: Mark centerlines of wall studs as shown below. Bottom of mounting rail should be 83-3/4” from the floor. The center of the track should be mounted 1-1/2” from the edge of the door opening for optimal operation. K 23 SD36-6905REV1.
16 NOTE: Drill 3/8” through holes on the mounting rail so they will align with the wall studs. The holes should be drilled 1-1/8” from the top of the rail. K SD36-6905REV1.
17 NOTE: Place mounting rail on wall aligning with markings from step 15. Mark hole locations through mounting holes and onto wall. Drill 1/4”D x 2” deep pilot holes into the wall studs. K 25 SD36-6905REV1.
18 AA [x5] BB [x5] Note: Mounting bolts AA (X5) must be screwed into the wall stud. K SD36-6905REV1.
19 KK [x1] LL [x2] 11 2" 27 SD36-6905REV1.
20 2 1 SD36-6905REV1.
21 GG [x2] MM 29 SD36-6905REV1.
22 HH NN SD36-6905REV1.
CARE / MAINTENANCE SOIN / ENTRETIEN CUIDADO / MANTENIMIENTO Care and Maintenance Soin / Entretien Cuidado / Mantenimiento • Use a soft, clean cloth that will not scratch the surface when dusting. • Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. • Using solvents of any kind on your furniture may damage the finish. • Never use water to clean your furniture as it may cause damage to the finish.
INSTALLED REPLACEMENT PARTS SD36-6905 PIÈCES DE REMPLACEMENT INSTALLÉES SD36-6905 PIEZAS DE REPUESTO INSTALADAS SD36-6905 QQ [x4] PH-TNTZNC001 1-866-661-1218 tsicustomerservice.com When registering your product, be sure to sign up for our updates to receive important service information and helpful tips. We value your privacy and will never share your personal information with other organizations. The information you submit is used only for providing product related services to you.
