User guide

Introduction 2-2 Manual 0-4965
Drag-gun™ lt
2.05 General Specification
Model Description
15C Drag-Gun™
LT
Maximum output 15 Amps
Input Voltage & Phase
120V,
Single Phase
Frequency 60Hz
Input power 2.2 kVA
Current Input fuse
U.S. / Canada 20
Amps
No Load Voltage 330V
Load Voltage 86V
Output Current 15 Amps
Post flow time 12 Seconds
Duty cycle @ 104°F /
40° C Ambient
30% @ 15A,
86vdc
Genuine Cutting
Capacity
3/16”
(4.5 mm)
Maximum Cutting
Capacity
1/4”
(6.5 mm)
Dimension (W * D * H)
6.5”x18”x9.5” (165
mm x 457 mm x
241 mm )
Gross Weight 30 lbs. (11.2 kg )
NOTE:
Refer to Local and National Codes or local au-
thority having jurisdiction for proper wiring
requirements.
2.06 Features
• COMPACT and LIGHT - Designed for easy
transportation.
• ENERGY EFFICIENCY - Advanced tech-
nology reduces power consumption.
• HIGH SPEED GENUINE CUTTING - The
constricted plasma arc provides high speed
cutting as well as a good quality genuine,
narrow cut.
• LOW COST WITH COMPRESSED AIR
- The Drag-Gun™ LT operates on its own-
compressed air.
• ALL KINDS OF METALS - Useful for
most metals such as stainless steel, alumi-
num, mild steel, copper and their alloys.
• PILOT ARC IGNITION FROM TORCH
- The Pilot Arc ignites the cutting arc.
• POWERFUL CUTTING PERFORMANCE
- Genuine cutting capacity is 3/16” (4.5
mm).
• ABLE TO CUT PAINTED MATERIALS
- Pilot Arc ignition allows the Drag-Gun™
LT to cut painted materials.
• EXTENDED PARTS LIFE - Consumable
parts life is longer.