Service Manual Instruction Manual

TRANSARC 130i
Manual 0-5282 1-9 GENERAL INFORMATION83
WARNING
FALLING UNIT can cause injury.
• Useliftingeyetoliftunitonly,NOTrunninggear,
gas cylinders, or any other accessories.
• Useequipmentofadequatecapacitytoliftand
support unit.
• Ifusingliftforkstomoveunit,besureforksare
long enough to extend beyond opposite side of
unit.
WARNING
MOVING PARTS can cause injury,
• Keepawayfrommovingpartssuchasfans.
• Keepawayfrompinchpointssuchasdriverolls.
• Have only qualified persons remove doors,
panels, covers, or guards for maintenance as
necessary.
• Keephands,hair,looseclothing,andtoolsaway
from moving parts.
• Reinstalldoors,panels,covers,orguardswhen
maintenance is finished and before reconnecting
input power.
WARNING
MAGNETIC FIELDS can affect Implanted
Medical Devices.
• Wearersof Pacemakers and otherImplanted
Medical Devices should keep away from servic-
ing areas until consulting their doctor and the
device manufacturer.
WARNING
OVERUSE can cause OVERHEATING.
• Allowcoolingperiod;followrateddutycycle.
• Reduce current or reduce duty cycle before
starting to weld again.
• Donotblockorlterairowtounit.
WARNING
H.F. RADIATION can cause interference.
• High-frequency(H.F.)caninterferewithradio
navigation, safety services, computers, and
communications equipment.
• Haveonlyqualiedpersonsfamiliarwithelec-
tronic equipment install, test, and service H.F.
producing units.
• Theuserisresponsibleforhavingaqualied
electrician promptly correct any interference
problem resulting from the installation.
• IfnotiedbytheFCCaboutinterference,stop
using the equipment at once.
• Have the installation regularly checked and
maintained.
• Keephigh-frequencysourcedoorsandpanels
tightly shut, keep spark gaps at correct setting,
and use grounding and shielding to minimize
the possibility of interference.
!
WARNING
READ INSTRUCTIONS.
• UseTestingBooklet(PartNo.150853)when
servicing this unit.
• ConsulttheOwner’sManualforweldingsafety
precautions.
• Useonlygenuinereplacementpartsfromthe
manufacturer.