Owner manual

ULTRA-CUT 100 XT
Manual0-5272 OPERATION 4-1
SECTION 4: OPERATION
4.01 Power Supply Control Panel
Art # A-11541_AB
AC Indicator
Temp Indicator
Gas Indicator
DC Indicator
A/
Status Indicator
A/
AC Power Lamp
IndicatesunithaspassedtheinputpowertestsandACpowerisbeingsuppliedtotheinvertermodulesviathe
inputcontactorwhentheON/OFFswitchisinONposition.
TEMP Lamp: NormallyOFF.LampwillcomeONwhentheinternaltemperaturesensorsdetecttemperatures
abovenormallimits.Lettheunitcoolbeforecontinuingoperation.
GAS Lamp: ONduringstartupgaspurge/pumppriming,thensteadywhenevergasisowing.Indicates
adequategaspressureandcoolantowforoperation.
DC Lamp: IndicatesthepowersupplyisgeneratingoutputDCvoltage.
A/
Status Indicator: ShowsCCMcodeversiononstartupfollowedbytheCurrentControlseingand
systemstatus.RefertoSection4.05andStatusCodeSectionfordetails.
Rear Panel AC Power Lamp
Indicates AC power is present inside the unit