Owner manual

ULTRA-CUT 100 XT
3-2� INSTALLATION Manual 0-5272
2. RemovetheCoverPanelfromtheArcStarter.
Art # A-12059
Lower screws
(2 per side)
Upper screws (2 per side)
Cover
Ground Wire
Cover Removal
3. PositiontheArcStarteronaat,horizontalmountingsurface.
4. Usepre�drilledholesinatleasttwoofthefeetonthebottomoftheArcStartertosecuretheArcStarterto
the mounting surface.
Art # A-12060
Minimum 2