Manualshelf

Owner manual

ManualsBrandsTweco ManualsEquipment100 XT Ultra-Cut Plasma Cutting System
31323334353637383940
ULTRA-CUT 100 XT
Manual 0-5272 INSTALLATION 3-13
Avoid the following:
1. If you need to pull the cable through a power track do not fold the fiber back on itself making a sharp bend
whereitexitsthehose.
Art # A-09417
2. Don’thookontothebertopullonthecable.
Art # A-09418
3. Once the fiber cable is installed in the CCM or gas control make sure the strain relief nut is securely tightened
ontothehosesothehosecan’tpulloutofitlikethis: