Owner manual

ULTRA-CUT 100 XT
A-78 APPENDIX Manual 0-5272
613 USB Log File Creation Fault
WhenupdatingtheCCM,DMCandDPCprogramsfromaashdrive,aloglecalledCCM_LOG.TXTiscre-
atedontheashwhichreportsontheresultsoftheupdateincludinganyproblems.Ifthatloglecan’tbe
createdyouget613.Thismaybeaproblemwiththeashdrivehavingtoomanyotherlesonitoraproblem
with its format that may not be compatible with the CCM.
1. Tryputtingtheupdatelesonadifferent,preferablyempty,ashdrive.
2. Orsavealltheashdrivelesinanotherplaceonyourcomputer,thendeleteallthelesontheashdrive.
Nowcopyontotheashdriveonlythelesrequiredforprogramupdates.
3. Iftheabovedoesn’twork,makingsureyoustillhavecopiesoftheles,formatyourashdrivewhicherases
everythingonit.Nowloadonlythelesrequiredforprogramupdate.
614 No USF File
TheleVTCCMFW.USFisrequiredontheashdrivealongwiththeprogramleswhenperformingaprogram
update.Ifit’seithermissingorcorruptedthedisplaywillshowb614.The“b”indicatesthefaultisgenerated
bytheBootloaderprogramratherthanthenormalapplicationprogramcode.Notethateachnewrevisionof
theprogramlesissuppliedwithanewVTCCMFW.USF.Eventhoughthenameisthesameitrequiresthe
newversionofthislethatissuppliedwiththeapplicationcode.
1. InstallthecorrectVTCCMFW.USFontheashdrive.
2. IfyoualreadyhavethecorrectversionofVTCCMFW.USFperhapstheashdriveistheproblem.Follow
theinstructionsforcode613.
615-617 No Update File for CCM, DPC or DMC found
ProgramlesfortheCCM,DMC&DPCmaybeupdatedthroughtheplasmasupply’sUSBport.TheGCM2010
is updated by other means. For a unit with GCM 2010 the CCM may still be updated using the USB. Program
updatelesareintheformatCx_x_0.S(CCM);Mx_x_0.S(DMC)andPx_x_0.S(DPC).
IftheBootloaderndsthereare3devices,CCM,DMC&DPContheCANBUSbuttheashdrivedoesn’thave
all3updatelesitwillgoaheadandupdatethoseithasbutwillshowacodeindicatingthatoneormoreare
missing(615forCCM;616forDMC;617forDPC).
TryanotherashdriveorifyouknowthisoneisOK(itworkswithacomputer),thenreplacetheCCM.
This completes the Advanced Troubleshooting information.