Owner manual

ULTRA-CUT 100 XT
Manual 0-5272 SPECIFICATIONS 2-1
SECTION 2: SPECIFICATIONS
2.01 General Description Of The System
AtypicalUltra-CutXT™systemcongurationincludes:
• OnePowerSupply
• RemoteArcStarter
• GasControlModule
• TorchValveAssembly
• PrecisionPlasmaCuttingTorch
• SetOfConnectingLeads
• TorchSparePartsKit
The components are connected at installation.
2.02 Plasma Power Supply
Thepowersupplyprovidesthenecessarycurrentforcuttingoperations.Thepowersupplyalsomonitorssystem
performance, and cools and circulates the liquid coolant for the torch and leads.
2.03 Remote Arc Starter
This unit produces a temporary HF pulse to start the pilot arc. The pilot arc creates a path for the main arc to transfer
tothework.Whenthemainarcisestablished,thepilotarcshutsoff.
2.04 Gas Control Module
Thismoduleallowsremotesettingofgasselection,pressures,andowstogetherwithsettingofcuttingcurrent.
2.05 Precision Plasma Cutting Torch
Thetorchdeliversthecontrolledcurrenttotheworkthroughthemainarc,causingthemetaltobecut.