Manual

ULTRA-CUT 100 XT
3-10 INSTALLATION Manual 0-5303
3.10 Connect Cables for CNC, Remote Arc Starter, DMC-3000 and HE 400
1. Connectoneendofeachcabletothepowersupply.
2. Connect the other end of the CNC cable to the CNC device.
3. The CNC cable shield must be attached to ground at the CNC end.
USER INPUT
HEIGHT CONTROL
F1 - 8A SB 230 VAC F2 - 8A SB 230 VAC
CB4 - 5A 120 VAC
CB3 - 5A 24 VAC
CB2 - 5A 120 VAC
J55 - GCM
J15 - CNC
J59 - RAS
J70 - HE
J54 - TSC /COMM
Art # A-11971
J15 To CNC Control
J59 To Remote
Arc Starter
J55 To GCM
J70 To Heat
Exchanger
J54 TSC/
Comm