Manual

ULTRA-CUT 100 XT
3-4 INSTALLATION Manual 0-5303
3.05 Lift the Power Supply
WARNINGS
Do not touch live electrical parts.
Disconnect input power conductors from de-energized supply line before moving unit.
FALLING EQUIPMENT can cause serious personal injury and equipment damage.
Useaforklift,crane,orhoisttolifttheunitofftheshippingpalletasshown.Keepthepowersupplysteadyandverti-
cal.Donotliftitanyfurtherthannecessarytocleartheshippingpallet.Ensureallpanelsandscrewsaresecure
prior to lifting.
Art # A-11531_AC
Setthepowersupplyonasolid,levelsurface.Theinstallermayfastenthepowersupplytotheoororasupport-
ingxturewithhardwarepassingthroughthehorizontalpartsofthepowersupplyfeet.