User Manual

14 Multi Format LCD Monitor Multi Format LCD Monitor 15
[3] Marker
MARKER : 4:3
SAFETY AREA : 90%
FIT MARKER : OFF
MARKER : 4:3
SAFETY AREA : 90%
FIT MARKER : ON
[4] GPI / UMD
REM
O
TE (
R
J
-45
)
1:
P
in1
2
:
P
in2
3:
P
i
n
3
4:
P
in4
5: P
i
n5
6:
P
i
n
6
7:
P
in7
8
:
G
ND
1
8
Menu
Classi-
cation
Settable Values
PIN
1~6
NONE,
Analog Channel,
CVBS Channel,
SDI-A Channel,
SDI-B Channel,
TALLY R, TALLY G, TALLY Y,
UNDER SCAN, 1:1 SCAN,
ASPECT,
H/V DELAY,
BLUE ONLY,
16:9 MARKER, 4:3 MARKER,
4:3 ON AIR MARKER, 15:9 MARKER,
14:9 MARKER, 13:9 MARKER, 1.85:1
MARKER, 2.35:1 MARKER,
1.85:1&4:3 MARKER,
CENTER MARKER,
SAFETY AREA 80%,
SAFETY AREA 85%,
SAFETY AREA 88%,
SAFETY AREA 90%,
SAFETY AREA 93%,
SAFETY AREA 100%
5. Menu Operations 5. Menu Operations
• Marker
- Used to activate the Marker function.
- Available marker types are OFF, 16:9, 4:3, 4:3
ON AIR, 15:9, 14:9, 13:9, 1.85:1, 2.35:1, 1.85:1 &
4:3 and USER.
• Center Marker
- Displays the Center Marker on the screen.
• Safety Area
- Used to select to display and controls the size
and availability of the Safety Area.
- Available sizes are 80%, 85%, 88%, 90%, 93%,
100%, EBU ACTION 16:9, EBU GRAPHIC 16:9, EBU
ACTION 14:9, EBU GRAPHIC 14:9, EBU ACTION
4:3 and EBU GRAPHIC 4:3.
• Fit Marker
- Used to activate or inactivate the Fit Marker
function.
- When the Marker type is selected in the Marker
menu, a border line of the Safety Area will be
displayed inside the Marker.Images below
show the dierence between Fit Marker ON
and OFF.
• Marker Mat
- Used to set the darkeness level outside of the
MARKER area from OFF(transparent) to 7(Black).
- The bigger the value, the darker the color.
• Marker Color
- Used to set the color of the MARKER lines.
- Available colors are white, gray, black, red,
green and blue.
• Thickness
- Used to set the thickness of the MARKER lines.
- Thickness level is from 1 to 7 by the pixel unit.
• USER Marker H1
- Used to set the position of the rst horizontal
marker line.
- Displayed when MARKER menu is set to USER.
• USER Marker H2
- Used to set the position of the second
horizontal marker line.
- Displayed when MARKER menu is set to USER.
• USER Marker V1
- Used to set the position of the rst vertical
marker line.
- Displayed when MARKER menu is set to USER.
• USER Marker V2
- Used to set the position of the second vertical
marker line.
- Displayed when MARKER menu is set to USER.
• GPI 1~8
- This item activate/ deactivate the REMOTE
function.
- The user may connect an RJ-45 jack to the
REMOTE terminal on the rear of the unit and
designate a function for each pin.
- The default settings are as follows :
PIN 1 : HDMI Channel
PIN 2 : SDI-A Channel
PIN 3 : SDI-B Channel
PIN 4 : TALLY R
PIN 5 : TALLY G
PIN 6 : Blue Only
- PIN 7 is POWER ON/OFF use only, PIN 8 is GND.
• The selectable values are as follows :