User Manual

6 Multi Format LCD Monitor Multi Format LCD Monitor 7
SDI-B
ANALOG
ASPECT
F1
F2
F3
F4
H/V DLY.
MAX BRIGHT
MENU/EXIT
SDI-A
HDMI
SCAN MARKER
BLUE/MONO
W-FORM/VECTOR
HDMI-OUT HDMI-IN
RS 422
SDI-B
ANALOG
ASPECT
F1
F2
F3
F4
H/V DLY.
MAX BRIGHT
MENU/EXIT
SDI-A
HDMI
SCAN MARKER
BLUE/MONO
W-FORM/VECTOR
2. Main Features
LVM-075A Monitor contains the following features:
• Compatible with various SDI signals
formats (SD/HD/3G)
- This product is compatible with various SDI
signals - SD/HD/3G(A/B)-SDI 480i, 576i, 1080i,
1080p, 1080psf
• Compatible with various analog signals
- This product is compatible with various
analog signals such as CVBS(Composite),
S-Video and YPbPr(Component).
• HDMI(with HDCP) Signal
- HDMI(w/ HDCP) input is available without any
other accessory.
• HDMI To HDMI Throughout
- This product features an HDMI To HDMI
Throughout.
• HDMI To SDI Conversion Output
- This product features an HDMI To SDI
conversion output.
• Temperature Adaptive Color
- This product provides a self-adjustment
function for white balance(or color temperature)
utilizing internal sensor that measures the
temperature of the LCD panel
• All-in-one type system
- Slim and all-in-one type monitor that supports
various video formats.
• Wide Screen / Wide Viewing Angle/ 24bit
RGB interface Full HD panel
• WaveForm/Vectorscope/Audio Level Meter
Function
- WaveForm & Vectorscope
- Embedded Audio Level Meter
• Audio Out
- Internal Speaker(actives only with input
signals with Embedded Audio)
- Stereo Audio Out through phone Jack.
• Knob Control
- Easy to adjust user conguration using the
control knob on the front of the monitor.
• BLUE ONLY/MONO/Focus Assist/H/V Delay
Function
• Range Error/Luma(Y’) Zone Check (Color/
Zebra Type) Function
• Internal Pattern Generator (0~100% Gray/
ColorBar+Pluge)
• Markers & Safety Areas
- Center Marker, Safety Area Marker, Aspect
Marker, Display Size(Scan)
• Pixel To Pixel/Zoom mode
- Used to display the original image resolution
without scaling to match a certain resolution
or an aspect ratio.
- Select ‘Pixel to pixel’ to display unscaled
images, and select ‘Zoom’ to enlarge the
original image.
- Zoom Scroll Function (Left/Right,Top/Bottom)
• Power
- Basically, the product is powered by normal
DC source.
- The product can be battery-powered.
*
DC 12V (Typical)
* When using a DC Adapter other than the one
supplied by the manufacturer, please be
advised that the adapter with DC 12V/3A ~ 6A
can be compatible with the monitor.
• Additional features
- Camera Mounting Hole x 4, VESA Mounting
Standard, External Tally Function, 600cd/m
2
Brightness, 800 : 1 Contrast, OSD user interface
3. Controls & Functions
LVM-075A : FRONT
LVM-075A : REAR