User Manual
34 Multi Format LCD Monitor Multi Format LCD Monitor 35
[7] Focus Assist
<Focus Assist ON>
<Focus Assist ON>
[8] Range Error
<Range Error OFF>
<Range Error ON>
[9] DSLR Scale
<DSLR Scale ON>
<DSLR Scale OFF>
• Focus Assist function assigns a color to the
pixels in the shape or boundary area of the
image to inform the user to make the best
focus.
- With this function, user can easily dierenciate
the focused area from out-focused area
especially shooting with shallow depth of eld.
- Available types are [Mono] and [Color] types.
*
[Mono] : Background image is mono type.
[Color] : Background image is original color type.
7. Other Functions 7. Other Functions
• Pixels with Y’ or C’ levels exceeding the
designated levels of Y MAX, Y MIN, C MAX
and C MIN shall blink.
- Analyzes the input signal’s Luma(Y’) and
chroma information(C’) and if the input
signal exceeds the designated minimum
value and maximum value, the pixel shall
blink. This function is to help the user to easily
nd out any unwanted level of signals and for
better exposure setting.
• This function is designed for some DSLR
cameras(Canon 5D, 550D and Nikon
D7000) that output dierent resolution
from the operation mode (preview,
recording, playback).
- Select the Camera model in the [Display/
Vide]-[DSLR Camera Sel.] menu.
• CANON
- In StandBy mode of Canon 5D Mark II, 1080i of
HD resolution is indicated. However, real
output resolution is 1620x1080 so blank area is
displayed on the screen because the 16:9
aspect ratio is not realized.
- In this case, use DSLR SCALE function to
enlarge the 1620x1080 image and display full
screen.
- In Recording mode of CANON 5D Mark II, the
output resolution is SD(480p).
- Although it is SD, the real output resolution is
640x390 not 720x480.
- DSLR SCALE function scales the 640×390
image to 1280x800(panel resolution) and
display full screen.
※
Note
1. When you compare the circle chart or the
camera shooting chart with DSLR connected
monitor(HDMI) and HDMI to SDI Conversion
connected monitor, The function of Live/Rec
16:9 mode should be selected to compare
circle and it is equal to its actual. If the circle is
compared in Live/Rec Full mode, the output of
the circle is deformed.
2. Both LVM-075A connected DSLR and LVM-
075A connected HDMI to SDI Conversion
should be compared to cirlce in Zeroscan
mode. It is deformed if user selects in Overscan
and Underscan mode.
• NIKON
- In StandBy/Record mode of NIKON, actual
resolution of the output signal from HDMI
terminal is 1440x1080, failing to display 16:9
aspect ratio and making marginal blank area.
Activating DSLR SCALE function will scale the
1440x1080 raster image to ll the full screen.
• SONY
- In StandBy/Record mode of SONY, actual
resolution of the output signal from HDMI
terminal is 952x634, failing to display 16:9
aspect ratio and making marginal blank area.
Activating DSLR SCALE function will scale the
952x634 raster image to ll the full screen.