User Manual

32 Multi Format LCD Monitor Multi Format LCD Monitor 33
[4] Line Select
(Waveform/VectorScope)
[5] Zoom
<ZOOM 75%>
<ZOOM 50%>
<ZOOM OFF>
[6] Luma(Y’) Zone Check
<Luma Zone Check OFF>
<Luma Zone Check ON_Color Pattern Type>
<Luma Zone Check ON_Zebra Pattern Type>
• Used to select specic Vertical Line for
WaveForm/VectorScope.
- It is available when LINE WaveForm is
activated.
- To activate this feature, go to [Waveform]-
[Select Line Position] and use the Knob to
select a vertical line.
- Control range varies according to the
resolution of the input SDI signal.
* PAL : Min 17, Max 522
* NTSC : Min 23, Max 623
* 720p : Min 26, Max 750
* 1080i : Min 21, Max 1123
* 1080p : Min 42, Max 1121
- Control range for HDMI/Analog signal varies
according to the output resolution of the
signal.
* Min 0, Max 600
* Selected line is indicated on the screen.
7. Other Functions 7. Other Functions
• Used to magnify the input signal from 0%
to 90%.
• Supports Zoom Width Scroll / Zoom Height
Scroll function.
• Zooms IN/OUT focused on the scrolled
area.
• Color Pattern Type
- Displays the Luma(Y’) level of the input image
in colors. Y’ ≥ 100% : Pixels with higher Y’ level
than 100 turn to red. Y’ ≤ 0% : Pixels with
lower Y’ level than 0 turn to green.
- Pixels with Y’ levels designated by the user are
displayed as following colors - yellow, pink,
cyan.
- Factory Default Y’ (Border line between pink
and yellow) level is 75% and pink color is
assigned to pixels with Y’ level from 70% to
75%. Yellow color is assigned to pixels with Y’
level from 75% to 85%, and Cyan from 60% to
70%.
- This function is designed for better
performance in setting the exposure of
lighting when shooting with vDSLR cameras.
• Zebra Pattern Type
- Displays the pixels with designated Luma(Y’)
levels with zebra pattern. Y’ ≥ 100%: Pixels
with Y’ level over 100% turn to red diagonal
line.
- Y’ ≤ 0% : Pixels with Y’ level under 0% turn to
green diagonal line.
- User dened Y’ levels are displayed as black
diagonal line.
- Factory Default Y’ level is 70% and the pixels
with Y’ level from 65% to 75% is displayed with
zebra pattern. Pixels with 10% of Y’ level is
displayed as black diagonal line.
- This function is designed for better
performance in setting the exposure of
lighting when shooting with vDSLR cameras.