User Manual

30 Multi Format LCD Monitor Multi Format LCD Monitor 31
[2] User Aspect [3] Waveform / Vectorscope
• Vector WIDE
• YCbCr
• Wave Vector
• Vector YCbCr
• Full Wide(Y)
• Full Wave(Y)
• Full Vector
100%
75%
7. Other Functions 7. Other Functions
• Select [Aspect] mode in the OSD menu to
activate the[User Aspect] mode.
• After activation, press the Knob to get
ready for controlling.
• Adjust the ratio using the Knob.
• Control range for width : Min[100] ~
Max[1920]
• Control range for height : Min[100] ~
Max[1080]
• The size-adjusted picture always stay in the
center of the screen.
# To adjust the 16:9 aspect ratio of 1920X1080
resolution into 2.35:1 aspect ratio, adjust the
width and height as 1920 x 816.
• Waveform Y
- Displays the Luma(Y’) component of the input
signal into waveform.
• VectorScope
- Displays the color components ‘B-Y’ and ‘R-Y’
of the input signals onto the X-Y axis.
- Two dierent types of Vetorscopes are
displayed according to SD or HD input signals.
- 100% and 75% scales are indicated on the
Vetorscope.
• Waveform Cb, Cr
- Displays the Cb, Cr components of the input
signal into waveform.