User Manual

28 Multi Format LCD Monitor Multi Format LCD Monitor 29
[4] Function Key Set Button [5] SCAN Button
<1:1 SCAN시 이미지 이동순서 >
<MID CENTER>
<TOP MID>
<BOT RIGHT>
<MID LEFT>
<TOP RIGHT>
<BOT MID>
<TOP LEF T>
<MID RIGHT>
<BOT LEFT>
[1] Pixel to Pixel
<CENTER>
UP
DOWN
<RIGHT TOP>
<MID BOTTOM>
<LEFT TOP>
<RIGHT MID>
<LEFT BOTTOM>
<MID TOP>
<RIGHT BOTTOM>
<LEFT MID>
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
<CENTER>
UP
DOWN
<LEFT TOP> <RIGHT TOP>
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
<RIGHT BOTTOM> <LEFT BOTTOM>
UP
DOWN
<CENTER>
UP
DOWN
<RIGHT TOP>
<MID BOTTOM>
<LEFT TOP>
<RIGHT MID>
<LEFT BOTTOM>
<MID TOP>
<RIGHT BOTTOM>
<LEFT MID>
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
<CENTER>
UP
DOWN
<LEFT TOP> <RIGHT TOP>
UP
DOWN
UP
DOWN
UP
DOWN
UP
DOWN
<RIGHT BOTTOM> <LEFT BOTTOM>
UP
DOWN
Input Action Available Modes
HD 720p
[Scroll UP]
(Clockwise)
Center -> Left Top -> Right Top -> Right
Bottom -> left Bottom -> Center -> …
[Scroll DOWN]
(Counter
clockwise)
Center -> Left Bottom -> Right
Bottom -> Right Top -> Left Top ->
Center -> ….
6. Button Functions
• Used to make a quick setting of the
Function Key.
1. Press the function button(F1~F4) on the front
of the monitor for more than 2 seconds and
activate the OSD menu as follows.
2. Move to desired function and press [ENTER]
button to select.
3. Once the function is set, press the
Function button(F1~F4) to activate
the function.
• This product supports various scan modes.
• Press [SCAN] button on the front of the
monitor to activate dierent scan modes.
1. [Press [SCAN] button continuously to
activate various scan modes: ZERO SCAN ->
OVER SCAN -> Pixel To Pixel -> USER.
2. The following represents the dierent types
of scan mode. When a scan mode is selected,
display skips the next mode if its required
condition is not met.
- OVER SCAN : Zooms in/out of the image to
96% of its original size without changing the
aspect ratio of.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- 1:1 SCAN : 1:1 pixel mapping of original
image. This feature is available only when
the size of the original image is bigger than
the screen size. Press [ENTER] button to
rotate the position.
MID LEFT -> TOP LEFT -> TOP MID -> TOP
RIGHT -> MID RIGHT -> BOT RIGHT -> BOT
MID -> BOT LEFT
7. Other Functions
• LVM-075A monitor provide pixel count info
using Pixel to Pixel mode.
1.
Select [Scan] mode in the OSD menu to
activate the[Pixel To Pixel] mode.
2.
After activation of [Pixel To Pixel] mode, use
the Knob to move the position.
# Pixel to Pixel mode is not available for Graphic
Signal input.
# Pixel to Pixel mode works for SD signal, when
the input resolution is lower than the monitors
native resolution.
• Positions in HD Signal 1080i/1080p mode
• Positions in HD Signal 1080i/1080p mode