User Manual

22 Multi Format LCD Monitor Multi Format LCD Monitor 23
[5] Waveform [6] Audio
5. Menu Operations 5. Menu Operations
• Range Error
- Used to set whether or not to activate Y MAX,
Y MIN, C MAX, C MIN, Y PICTURE BLINK and C
PICTURE BLINK functions.
- The values of Y MAX, Y MIN, C MAX, C MIN are
indicated in Waveform/Vectorscope.
- If [Y PICTURE BLINK] or [C PICTURE BLINK] is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN shall blink.
*
See section “Other Function -> [8] Range
Error” for more information.
• Y Max
- Used to set the maximum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the max Y’ level
will blink in the screen, and displayed as red
on the Waveform.
• Y Min
- Used to set the minimum luma(Y’) level from
0 to 255.
- Pixels with values exceeding the min Y’ level
will blink in the screen, and displayed as red
on the WaveForm.
• C Max
- Used to set the maximum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and displayed as red
on the Waveform.
• C Min
- Used to set the minimum chroma(C’) level
from 0 to 255.
- Pixels with values exceeding the min C’ level
will blink in the screen, and displayed as red
on the Waveform.
• Y Picture Blink
- Used to set whether or not to blink pixels with
values exceeding Y MAX and Y MIN.
• C Picture Blink
- Used to set whether or not to blink pixels with
values exceeding C MAX and C MIN.
• Volume
- Used to control the output volume for the
internal speakers or [AUDIO OUT] on the back
of the monitor.
- Control range is from 0 to 30.
• Em. Audio Left/Right
- Used to set embedded audio channel for
internal speaker or [AUDIO OUT] terminal on
the back of the monitor.
- In SDI mode one of the O or CH1~CH16, Ext.
Audio can be selected. In HDMI(HDCP 1.1
Version) mode, Left and Right are set to CH1
and CH2 respectivley.
- HDMI Input: Channel 1 is displayed on the top
left and Channel 2 is displayed on the top
right.
• Level Meter
- Used to set the Level Meter for the embedded
audio.
- Available options are OFF, 16 CH(HOR.) and 16
CH(VER.)
- SDI Input : [O]-[16CH(Hor.)]-[16CH(Ver.)]
- HDMI Input: [O]-[2CH(Hor.)]-[2CH(Ver.)]
*
16 CH(HOR.) : Displays 8 channels on top
left and 8 channels on top right of the screen
horizontally.
*
16 CH(VER.) : Displays 8 channels on center
left and 8 channels on top right of the screen
vertically.
*
8 CH : Displays 4 channels on top left and 4
channels on top right of the screen
horizontally.
*
8 CH Side : Displays 8 channels on top right of
the screen vertically.
*
4 CH : Displays 2 channels on top left and 4
channels on top right of the screen
horizontally.
*
4 CH Side : Displays 4 channels on top right of
the screen vertically.
• Level Meter Group
- Used to set the level meter group.
- Available modes are as below.
* 8CH/8CH Side : [G1+G2]-[G2+G3]-[G3+G4]-
[G1+G3]-[G1+G4]-[G2+G4]
* 4CH/4CH Side : [G1]-[G2]-[G3]-[G4]
• Level Meter Display (SDI Only)
- Used to set the display method for audio level
meter.
- Activates only in SDI mode.
- Available modes are Group and Pair.
• Level Meter Reference
- Display the default audio level meter value,
Available options are -18dB and -20dB.
- Audio level meter within selected value turns
to green and exceeded audio level is displayed
in yellow.
- Audio level exceeding -4dB is displayed in red.
• Level Meter Size
- Used to control the size of the audio level
meters.
- Available options are NORMAL and LAGRE.
• Peak Decay Time
- Sets the reduction time for max value
indication of audio signals.
- Control range is from MIN 0 to MAX 100. Bigger
number means a longer display time for max
value.