Operation Manual

Smart Player with HD Digital Jukebox
22
4.4 NETWORK Setting
This section is about NETWORK (Network or FTP) settings. Press the SETTING button on the remote
control, and then select NETWORK Settings.
** For detailed Network instructions, please refer to the enclosed TVIX CD or the latest pdf file on the
TVIX Homepage.
It allows you to connect to network easily with uPnP support, and it does not require an IP address. You can
immediately playback uPnP connected files (even full HD files) on wired/wireless network environment.
With Samba Server technology support, it can be used as a network storage device using a window explorer
for PC users, and it can also be used like a computer hard disk by specifying the shared folder between
users in the same network as a network drive.
With NFS, TVIX can play high bit-rate files from a PC or NAS flawlessly over a LAN.
We recommend NFS connection over SAMBA. You need to install the TVIX Netshare program (or other NFS
server) on the server PC, but the settings are much easier than in SAMBA mode.
You can download NetShare installer from our website to easily configure your NFS network.
* Wired Network Setting: Default setting is Auto(DHCP). If you cannot access via LAN with DHCP setting,
use the Static IP setting.
* Wireless Network Setting: Default setting is Auto(DHCP).Connect the optional USB WIFI module to
TVIX after connecting the AP Router to a PC. Press “Search Wi-Fi Network” to search for your AP or AP
router. Spend some time searching for it, and you will see the AP LIST popup menu. Select the AP that you
want to connect to.