Operation Manual

Smart Player with HD Digital Jukebox

4.3 Video and Audio Setting

This section is about A/V (Video and Audio) settings. Press SETTING button on the remote control and

select the Video or Audio.

* Audio Output : Select the HDMI or the S/PDIF that you want to hear the audio.

Select Digital audio when you connect the audio with an coaxial/optical cable for digital audio connection to

the Decoder/Amplifier.

* TV Standard : The default video setting of the TViX is COMPOSITE (NTSC or PAL). This is the most

general setting and works with almost all TVs.

* TV Resolution : Select this when you want to connect the video through a component or a HDMI cable.

With HDMI setting, you can select an output resolution between 480/576P, 720p 50hz/60hz, 1080i

50hz/60hz and 1080P 50hz/60hz.

* Set OSD Position : Adjust the UI display position, so that you can see the main UI display at the right

place on your TV.

Arrow buttons and OK button are available.

1. Adjust Left - Top blue line.

2. Adjust Right - Bottom blue line.

* Aspect Ratio : 4:3 Letter Box / 4:3 Pan & Scan for ordinary TVs; 16:9 for Wide TVs, such as HDTV or

Plasma TV.

If the ratio of the TV is 4:3, select the 4:3 letter box or 4:3 Pan & Scan. If the ratio is 16:9, select 16:9.

* The 4:3 Letter box can show the original ratio of the multimedia file in 16:9.