User Guide

ManualsBrandsTuya ManualsSecurity Doorbelltuya ZX-DB10 Wireless Security Doorbell

Wireless doorbell

User Guide

Congratulations on your purchase of our product. To ensure

proper use and trouble-free operation, please carefully read this

user guide first.

Introduction

This product is a modern and stylish wireless doorbell with 39

melodies and alarm chime, 8 volume levels and light ring. It can be

expanded with multiple receivers and be set the independent ring

tones for each transmitter, and remembers your last-set melody and

volume level after a power outage.The transmitter uses a CR2032

lithium battery which has an ultra long five-year lifespan.

Summary of content (5 pages)

PAGE 1
Wireless doorbell User Guide Congratulations on your purchase of our product. To ensure proper use and trouble-free operation, please carefully read this user guide first. Introduction This product is a modern and stylish wireless doorbell with 39 melodies and alarm chime, 8 volume levels and light ring. It can be expanded with multiple receivers and be set the independent ring tones for each transmitter, and remembers your last-set melody and volume level after a power outage.
PAGE 2
In The Box Doorbell/Receiver x1 Push Button/Transmitter x1 (CR2032 battery and insulating film included) Push Button Mounting Adhesive Pad x1 User Guide x1 At a Glance Doorbell Volume button Pairing/Reset /Music up button Music down button Light ring AC plug Push button Light ring Push button Tamper switch (Optional) Battery cover
PAGE 3
Installation Before installation, please test the doorbell button range first. It is not advised to mount the transmitter onto metal surfaces as the material can block RF signals between the transmitter and the receiver. Plug the receiver into the socket. Peel the insulating film from the battery to power the transmitter on. Tear off one side of the double-sides adhesive tap and stick it to the underside of transmitter, tear off the other side and attach transmitter in the desired location.
PAGE 4
Volume Adjustment Press the Volume Button to adjust the volume level of ringtone from highest to mute, then skip to highest. Changing Melody You need to pair the transmitter again if you want to change the chime tone. Please refer to Pairing. Reset /Deleting Transmitters This process resets the receiver to factory settings and removes all pairings. Press and hold Reset Button until you hear four beeps with light ring flashing four times.
PAGE 5
Specifications Doorbell Power Supply: 110/220VAC Consumption: <5mA @Standby Radio Frequency: 433.92Mhz Selectable Melodies: 38 Volume Levels: 8(mute included) Sound Level(typical): 85dBA Expandable: up to 100 receivers Operation Temperature: -10~55℃ Push Button Power Supply: DC 3V (CR2032 Lithium Battery x1) Standby Current: <5uA Transmitting Distance: <80m (Without obstacles and no Interference) Radio Frequency: 433.