User Guide

Please read the instructions carefully before using the product
and keep it properly.
As the APP version is updated, there will be changes. This
manual is for reference .
APP Quick Start Guide
Solar Camera
1、Packing list
Camera
Solar
panel
Bracket
Certificate
of conformity
Accessory
package
Manual
(please refer to the actual product)
CE
① ② ③ ④ ⑤ ⑥
2.Schematic diagram of interface description
SD Card
SIM Card
USB interface
ON/OFF
Reset
Indicator led
Lens
White light
Microphone
Photoresistance
Antenna
Solar panel
PIR
Solar panel interface
Speaker
3.Download and install the APP
① Scan the QR code below and click to install or open the mobile app
market to search for Tuya Smart.
4G
4.Sign up for Login Account
①Enter your mobile phone
number or email address.
②Enter the verification code and set
the password, then click login.
5.Device Connection
④ The device is being added.
③ Scan the QR code on the device.
Register
Note: This device has built-in battery pack. For the first use,please use
the DC 5V2A with USB cable to charge for 10 hours.
1. Button:
Solar panel On/Off button : Close to USB port, the power stops;
Instead, power supplies.
On/Off button : Long press for 3 seconds to on or off.
Reset button : In the boot state, long press for 5 seconds to reset.
2. Indicator light:
The red light keeps flashing : Failed to connect to network.
The blue lights up : Enter the normal working state after
successful registration.
The blue light keeps flashing : Connected the network successfully.
Insert the SIM card into the device (the cutaway of SIM card is down and the
chip of SIM card is facing the button).
If recording is needed,please insert the SD card（the chip of SD card is facing
the USB interface） then wait for the red light to turn blue and keep flashing.
① Click on "Add".
3. Please open the APP as follows:
② Click "Scan Code".
1 2 3 4