User Manual

V1.0.20
5 / 29
Obfuscated Password: When entering the password, you can enter 5 to 8 digits of the obfuscated
password, as long as it contains the correct 4 digits in succession, it can be recognized as the correct
password.
Local Alarm: When the security panel alarms, the security panel horn and wired siren emit the alarm
sound.
Siren Alarm: When the security panel alarms, it will send a wireless alarm code to control the wireless
siren to alarm.
Siren Beep: When the status of the security panel is switched, it will send a wireless code to control the
wireless siren to beep for a short time as a reminder.
Delay Beep: When the security panel is in the delay arming or delay alarm state, it will sound a reminder.
Door/Window Opened Warning: When the security panel enters the armed state, if the doors and
windows are not closed, the security panel interface will pop up to prompt.
Door/Window Opened Chime: When the doors and windows are opened, the safety panel will have a
sound.
Voice Prompts: There is a corresponding voice prompt when the user operating the security panel.
Key Beep: When operating the virtual buttons on the security panel, there will be a corresponding
prompt sound, which improves the touch experience.
Doorbell Volume: When the doorbell button is triggered, the security panel will emit a doorbell tone.
Remote Control: The user can arm and disarm the devices through APP.
Tamper switch: There is a device anti-dismantling switch on the back of the security panel, which
alarms when the panel is removed by external force.
Timer: The user can customize the time when the security panel enters the Away Arm/Stay Arm/
Disarm/ SOS on the APP.
Doorbell: When the doorbell is triggered, no alarm will be generated, and the security panel will prompt a
"dingdong" sound.
Alarm type: The user sets the corresponding type according to the detector type and application
scenario, which is convenient for the user to manage and can quickly distinguish the corresponding
device type after triggering an alarm.
The alarm types are as follows: System Alarm, Door Alarm, Parlor Alarm, Panic Alarm, Bedroom Alarm,
Window Alarm, Balcony Alarm, Perimeter Alarm, Fire Alarm, Gas Leak, CO Leak and Water Leak.
Zone: Used to distinguish the detectors, when the detector is triggered, the user can determine the alarm
location by the zone number.