User Manual

V1.0.20
4 / 29
II. Description of Terms
Security Panel: The security panel is the core of home security and an integrated gateway for all
accessories.
Away Arm: The security panel is in a monitoring state, when the accessories are triggered, the security
panel will alarm.
Stay Arm: When the user is at home, in this mode, some areas can be monitored and alarms.
Disarm: The security panel cancels the monitoring state, and only the SOS button or the accessories
with "24h always active" can trigger the alarm.
Remote Control: After pairing with the security panel, the security panel can be remotely controlled to
enter the states of "Away arm", "Stay arm", and "Disarm", and also SOS button.
Detector: According to the type of the detector, install it in the corresponding area. After the detector is
triggered, it will immediately send an alarm to the panel for processing. Common detectors include door
sensors, infrared detectors, smoke detectors, gas detectors, etc.
Wireless Siren: After pairing with the security panel, when the accessory is triggered to alarm, the
security panel will notify the wireless siren to alarm, and the alarm volume can be maximized.
Emergency Number: When the security panel alarms, it will also send a text message or make a call to
the set phone number for real-time reminders.
Arm Delay: When the security panel is in the "Away Arm" state, the safety panel will enters the armed
state after a delay, so that the user has time to evacuate the monitoring area.
Alarm Delay: When the security panel receives the alarm from the detector, the alarm will be delayed for
a period of time. During the alarm delay period, the user password can be used to cancel the alarm.
Siren Time: The duration of the alarm on the security panel, after which the siren stops sounding.
User Password: The default user password is 1234, and the user can customize the user password.
WiFi network configuration, disarming, accessory setting, phone number setting, security setting, user
password is required.
System Password: The default system password is 9876, and the user can customize the system
password.
The security panel “Recover” and “Reboot”, the system password is required.
Password Rules: After entering the correct password, there is no need to enter the password again
during the screen standby time set by the user, and the maximum time is no more than 5 minutes (the
latest version does not exceed 2 minutes), and the password needs to be entered again.