User Manual

V1.0.20
21 / 29
5.2.3 Specification
Battery specification: CR2032 1
Quiescent current: 1 A
Working current: 10mA
Working temperature: 14 ~122 (-10 ~ +50 )
Wireless parameters: 433MHz, eV1527
Product size: 60 39.7 12mm
5.3 Door/Window Sensor
5.3.1 Installation
The door sensor should be installed on the door or window.
(1) First, wipe the corresponding position on the door clean, take out the door sensor, and stick
double-sided tape on the bottom.
(2) The door sensor transmitter (large) and the door sensor magnet (small) should be installed
separately, that is, the transmitter should be installed on a fixed door frame, and the magnet
should be installed on the movable door.
(3) The triangle marks on the transmitter and the magnet should be facing each other, and the
distance between the two is less than 10mm.
(4)
When the door is opened after installation, the indicator light will be on for 2 seconds to indicate
that the installation is complete.
Door Sensor Detector Installation diagram