User Manual

V1.0.20
15 / 29
successfully, the APP will pop up to enter the "User Authorization Interface", the user can choose to
authorize, and click "Enter APP" after authorization to enter the APP interface.
(7) Users can log in to the APP with a registered account and password.
4.3 Connect panel to Smart Life APP
NOTICE: You should connect your mobile phone to the 2.4G WiFi network before using smart life APP to
connect the device.
(1) Open the "Smart Life" APP and enter the "Home" interface of the APP.
(2) Click the "+" in the upper right corner of the interface and select "Add Device".
(3) Click the "Sensors" option, and then click "Alarm (WiFi)", the interface will display the WiFi
connected to the phone.
(4) Input the WiFi password.
(5) After input the WiFi password, click "next" and choose "Confirm the indicator is blinking
rapidly" in the pop-up interface.
(6) Click "next" and "adding device" will be displayed in the app interface.
(7) Click "Menu", "Settings" and "WiFi" in the Security Panel in turn.
(8) Enters the default user password: 1234, and then clicks "Airlink (recommended)".
(9) The device will pop up "WiFi settings will be reset, please confirm". After click "OK", the
device will prompt "setting up, please wait".
(10) When the device is successfully connected to the APP, the device will give a voice prompt of
"Setup successful". The APP will also show that the device has been added successfully.
(11) Users can set the name of the device according to their preferences. If the user does not want to
change the device name, they can click "Done" in the upper right corner.
(12) In order to allow users to use APP to realize remote control equipment more conveniently. As long
as the device and the APP are connected, even if the phone is not connected to the original WiFi
network, the user can use the APP to remotely control the device.