V1.0.
V1.0.20 CONTENTS I. General Description ...................................................................................................................................... 3 II. Description of Terms ................................................................................................................................... 4 III. Security Panel ............................................................................................................................................. 7 3.
V1.0.20 I. General Description Welcome to use the smart security system kit, your home security is the direction of our efforts. The security panel is embedded with a high-performance and low-power intelligent microprocessor, adopts a 4.3-inch IPS color screen, and uses capacitive touch control. The security panel can be wirelessly connected to motion detectors, door sensors, smoke detectors, gas detectors, emergency buttons, remote controls and other accessories.
V1.0.20 II. Description of Terms Security Panel: The security panel is the core of home security and an integrated gateway for all accessories. Away Arm: The security panel is in a monitoring state, when the accessories are triggered, the security panel will alarm. Stay Arm: When the user is at home, in this mode, some areas can be monitored and alarms. Disarm: The security panel cancels the monitoring state, and only the SOS button or the accessories with "24h always active" can trigger the alarm.
V1.0.20 Obfuscated Password: When entering the password, you can enter 5 to 8 digits of the obfuscated password, as long as it contains the correct 4 digits in succession, it can be recognized as the correct password. Local Alarm: When the security panel alarms, the security panel horn and wired siren emit the alarm sound. Siren Alarm: When the security panel alarms, it will send a wireless alarm code to control the wireless siren to alarm.
V1.0.20 Mode (1) 7 options All Arm Active When the security panel is in "Away Arm" or "Stay Arm", the panel will alarm after the detector is triggered. It is recommended that the outdoor detector can be set to this mode. (2) Away Arm Active When the security panel is in "Away Arm", the panel will alarm after the detector is triggered. It is recommended that the outdoor detector can be set to this mode.
V1.0.20 III. Security Panel 3.1 Main Features (1) Built-in high-performance core processor, the main frequency is up to 600MHz, powerful performance, fast and smooth operation. (2) 4.3-inch IPS color display, wider viewing angle of the screen, better visual experience. (3) With capacitive touch screen, the touch experience is more comfortable. (4) New Xsense UI interactive interface. (5) Built-in WiFi, 2G/4G, support APP push, phone/SMS notification.
V1.0.20 3.
V1.0.20 Indicator: Notice: (1) The security panel should be installed as close to each detector as possible to ensure the best wireless communication between the security panel and the detector. (2) Since the security panel and the detector use wireless communication, the installation location should be as far away as possible from household appliances with high frequency interference or heavy doors that are difficult to penetrate. 3.3 Functions 3.3.
V1.0.
V1.0.
V1.0.
V1.0.20 The panel can be arm/disarmed by App remotely, also can be arm/disarmed by SMS command (firmware version should be 1.0.20 or above). The SMS commands and panel actions taken are as bellow: No.
V1.0.20 IV. Using Smart Life APP This device can be connected and controlled through the "Smart Life" APP. Please download the "Smart Life" APP in advance from the app store. The relevant guide details are as follows: 4.1 Download APP - Smart Life Users can search "Smart Life" in major global app stores or scan the QR code below to download. (1) iOS users, please scan the iOS link QR code. (2) Android users, please scan the QR code of the Google Play link.
V1.0.20 successfully, the APP will pop up to enter the "User Authorization Interface", the user can choose to authorize, and click "Enter APP" after authorization to enter the APP interface. (7) Users can log in to the APP with a registered account and password. 4.3 Connect panel to Smart Life APP NOTICE: You should connect your mobile phone to the 2.4G WiFi network before using smart life APP to connect the device. (1) Open the "Smart Life" APP and enter the "Home" interface of the APP.
V1.0.20 4.
V1.0.20 4.5 Setting Accessories on Smart Life APP The steps are as follows: (1) Open the APP, click "Accessories", you can view the number of remote controls, detectors, doorbells that have been added, as well as the type and attributes of the defense zone. (2) Accessories can be added remotely through the "+" button in the upper right corner of the interface.
V1.0.20 V.Accessories 5.1 Motion Detector 5.1.
V1.0.20 Motion Detector B NOTICE: (1) The installation height is 2.0~2.2 meters above the ground, the detection distance is transmission distance is 7M, the 150M (without obstacles), please test the distance before installation, the transmission distance will be different for different obstacles.
V1.0.20 5.1.2.2 Motion Detector B Battery specification: 1.5V AA battery Alarm current: 3 15mA Relative humidity: 95% (no condensation) Wireless parameters: 433MHz, eV1527 Quiet current: 15 A Detection angle: 110 Working temperature: 14 Product Size: 114.5 ~122 (-10 ~ +50 ) 60 42.8mm 5.2 Remote Control 5.2.1 Parts Description 5.2.
V1.0.20 5.2.3 Specification Battery specification: CR2032 Working current: 1 10mA Quiescent current: 1 A Working temperature: 14 ~122 (-10 Wireless parameters: 433MHz, eV1527 Product size: 60 39.7 ~ +50 ) 12mm 5.3 Door/Window Sensor 5.3.1 Installation The door sensor should be installed on the door or window. (1) First, wipe the corresponding position on the door clean, take out the door sensor, and stick double-sided tape on the bottom.
V1.0.20 NOTICE: (1) The magnetic transmission distance is 100M (without obstacles), please test the distance before installation, the transmission distance will be different for different obstacles. (2) The door sensor indicator light is on for 2 seconds to indicate an alarm, and the indicator light flashes for 2 seconds to indicate a low battery. (3) If the door sensor is installed on the iron door, the distance C should be as small as possible.
V1.0.20 5.3.2 Battery Replacement Door Sensor A Door Sensor B 5.3.3 Specification 5.3.3.1 Door Sensor A Battery specification: 23A12V Alarm current: 20mA Relative humidity: Product size: 65 1 52 11.
V1.0.20 5.3.3.2 Door Sensor B Battery specification: CR2032 1 Quiet current: 8 A Alarm current: 15mA Working temperature: 14 Relative humidity: Wireless parameters: 433MHz, eV1527 Product Size: 49 95% (no condensation) 26 ~122 (-10 ~ +50 ) 12mm (large) 35 12.5 12mm (small) 5.4 Doorbell 5.4.1 Features (1) Two installation methods: support glue and screw fixation. (2) No standby power consumption. (3) Using DC12V power supply, higher transmitting power, longer wireless distance. 5.4.
V1.0.20 (3) Hold the lower cover tightly with your left hand, fasten the upper cover and the lower cover with your right hand, and then press along the edges, as shown in the following figure: (4) Installation is complete 5.4.
V1.0.20 VI. Troubleshooting and Maintenance Failure The Reason 1. Low battery 2. The metal sheet of the battery compartment is in Remote control poor contact or is corroded malfunction 3. The code is not paired with the panel 4. Does not match the wireless parameters of the panel 1. Low battery 2. The metal sheet of the battery compartment is in poor contact or is corroded Door sensor 3. The code is not paired with the panel failure 4. Does not match the wireless parameters of the panel 5.
V1.0.20 No emergency call was made when the alarm was triggered WiFi network configuration failed Door/Window opened warning is invalid 1. The panel is not armed 2. No emergency phone number is set 3. Improper installation of accessories, too far away from the panel 4. Encoding does not match 1. 2.4GHz WiFi is not connected 2. The current router is not compatible with quick configuration 3. Damaged WiFi module 1. Door sensor pairing error 2. The door sensor switch code does not match the panel 3.
V1.0.20 VII.
V1.0.20 VIII. Warranty Rules (1) Please contact our after-sales service for any failure caused by the product itself during the warranty period. (2) The goods are guaranteed for one year from the date of sale, and the warranty service is only valid under normal use. (3) Damage caused by the use environment not meeting the requirements of this product is not covered by the warranty. (4) Product damage caused by man-made and force majeure is not covered by the warranty.
