Installation Guide

INSTRUCTIONS
REMOTE CONTROL
EN
INSTRUCTIONS TUYA APP
Fan ON/OFFLight ON/OFF
Night light RGB
Brightness +
Color temperature +
Quickly change color temperature
Color temperature -
Brightness -
Brightness
Long press: gradually min/max
Short press: min/max individual stages
Color temperature
Long press: gradually min/max
Short press: min/max individual stages
Quickly change color temperature
1 x press to quickly change between 2700K (warm
white), 3500K (bright white) and 5000K (cold white)
Speed fan
Timer fan
Ajusting rotation direction
Battery: 2 x AAA, 1.5V
Distance: 6 meter
Output: Radio frequency
Voltage: 3V
EN
Step 1: Download and install the Tuya app
Step 2: Register of log into your account
1. Turn on the bulb while ensuring that your phone is connected to the 2.4 GHz
Wi-Fi network.
2. Use your phone to scan the QR code below or search ‘Tuya Smart’ in the App
Store to download and install the app.
● Click on the button ‘Register’ in the top right corner of the screen.
● Select your country and fill in your email address. Accept terms and conditions.
● You will now receive a verification code. Fill in this code and create a password.
Tap ‘Confirm’to finish your registration.
● You can now log in with your email address and chosen password.
If you don’t have a Tuya account yet, you can register a new account.
You can do so by following the steps below:
Step 3: Add your device
To add the smart bulb to your device, click on ‘Add device’ or on the ‘+’ in the right
corner of the screen. The app will start looking for devices itself (see step 4) or you
can add it manually from the list.
Step 4: Put your smart lamp in discovery mode
Step 6: Control devices
1. Open the light control page. If it is off, only the ‘Schedule’
function will be displayed. If the light is on, the complete
function will be displayed at the bottom.
2. Click on ‘White’ to manually adjust the brightness and color
temperature.
3. Click on ‘Color’ to manually select a color.
4. Click on ‘Scene’, you can choose the lighting mode under
different scenes.
Turn your smart bulb on and off for three times in a row
(on-off-on-off-on). Ensure that your smart bulb is
flashing/blinking quickly (twice a second) which indicates that
the device is in configuration. The smart bulb is now ready to be
connected to the Tuya app. Click the ‘Confirm light blinks
rapidly’button on the page to start the configuration.
Step 5: Access settings
After setting up successfully, you can now see your smart bulb on
the ‘Devices’ page.
You are now also able to give the smart bulbs a name, for
example ‘Kitchen lamp’ or ‘Big lamp’.
Step 7: Profile
You are now able to adjust the settings and manage the timer
setting with the Tuya app. You can control the Tuya app with your
voice or through the screen.
For all possibilities of the app consult the FAQ menu.