Installation Guide

CB66 - CB67 - CB68 Operator's manual 35

8. UTILITY PROGRAMMES

Utility programmes are available only in NORMAL mode.

8.1 Selecting the imbalance display resolution

The machine has two wheel imbalance display resolutions. The two resolutions are deﬁ ned as X1 (high

resolution) and X5 (low resolution).

The resolution with which the imbalances of the wheel are displayed varies depending on the unit of weight

as indicated in table T8.1.

Table T8.1 Display resolution

Set resolution Imbalance unit of measure Display resolution Notes

(high resolution)

Grams 1 gram

Ounces 0.1 ounces

(low resolution)

Grams 5 grams

The X5 resolution is set by

default at start-up

Ounces 0.25 ounces

To view the imbalance in X1 resolution (high resolution) press [F+P1]

. The machine will

display the message visible in Figure F8.1.0a for one second and the LED next to the button will turn on.

Imbalance values are now displayed in X1 resolution (high resolution).

Fig. F8.0a Enabling of the imbalance display in high resolution.

To return to viewing in X5 resolution (low resolution) press [F+P1]

again. The machine

will display the message visible in Figure F8.0b for one second and the LED next to the button will turn off.

Imbalance values are now displayed in X5 resolution (low resolution).

Fig. F8.0b Disabling imbalance view in high resolution.