Installation Guide

22 CB66 - CB67 - CB68 Operator’s manual
ab c
adhesive
surface
Fig. F3.12 Application of adhesive weights on the Distance/Diameter
3. Manually rotate the wheel until all the internal imbalance position LEDs light up (see fi g. F1, detail [4]).
Block the wheel in this position by using the footbrake or electromagnetic brake (if present);
4. Slowly extract the sensor until you hear the continuous beep indicating that the internal balancing
plane has been reached. The left display helps the operator in this operation by indicating the direction
in which the sensor must be moved. See fi gures F3.13, F3.14 and F3.15;
Fig. F3.13 - Balancing planes search: the left display indicates to extract the sensor (moving it to the
right) in order to fi nd the exact position of the internal balancing plane
Fig. F3.14 - Balancing planes search: the left display indicates to re-introduce the sensor (moving it
to the left) in order to fi nd the exact position of the internal balancing plane
Fig. F3.15 - Balancing planes search: the left display indicates that the sensor is exactly on the internal
balancing plane