Installation Guide

10 CB66 - CB67 - CB68 Operator’s manual
Table T3.1.1 Angular position of the balancing weights in the various Programme Types
Machine
data
acquisition
system
Programme Type
STD,
ALU1,2,3,4,5
ALS1 ALS2
Internal
Plane
External
Plane
Static
Plane
Internal
Plane
External
Plane
Static
Plane
Internal
Plane
External
Plane
Static
Plane
Manual H12 H12 H12 H12 H6 H6 H6 H6 H6
Semi-auto-
matic
H12 H12 H12 H12
Sensor-
rim
contact
point
(1)
H6
Sensor-
rim
contact
point
(1)
Sensor-
rim
contact
point
(1)
H6
Automatic H12 H12 H12 H12
Sensor-
rim
contact
point
(1)
H6
Sensor-
rim
contact
point
(1)
Sensor-
rim
contact
point
(1)
H6
Note (1): if the data acquisition system is disabled, the angular position of the weight will be in the 6 o’clock
position.
In table T3.1.1, the symbol H12 indicates that the angular position of the weight is at 12 o’clock while the
symbol H6 indicates that the angular position of the weight is at 6 o’clock.
***There’s laser device in the cover under the main shaft on the machine with the function which can input
three values automaticlly. When the “LAS“ is ON, the laser will light automaticlly at the unbalance position
under ALUS mode and put the weight at H6 position. ***
The machine data acquisition systems are defi ned as follows:
• Manual when the data of the rim must be all entered manually;
• Semi-automatic when the Distance and Diameter data are automatically acquired via the Distance/Dia-
meter sensor while the data on the Width must be entered manually;
• Automatic when all data of the rim is automatically acquired via the two sensors.
Automatic or Semi-Automatic machines with the sensors disabled (due to failure or for any other reason)
become, to all intents, Manual machines. Entering the dimensions of the rims must be carried out manually
and the angular position of the balancing weights will follow the procedures of the Manual machines.
3.2 Wheel type
The machine allows choosing between three different Wheel Types as listed in table T3.2.
Table T3.2 - Wheel Types to select
Wheel type Vehicle Notes
CAR
Auto-vehicles Start-up default