Installation Guide
2
Wheel balancer must be transported by the original
package and place according to the position indicated
on the package box and carried by the forklift with the
corresponding lift capacity. The insert direction of the
forklift must be in accordance to the direction in the
picture.
Remove the package
•Open the protective cartoon or wood cartoon or the
plastic bag and check the machine is complete or not
and if the spare parts is missing or not.
•Remove the anchor bolt and detach the wheel
balancer but we cannot carry the mail shaft of the
wheel balancer.
•If you have any question, do not use the machine and
contact with the supplier at once.
Use of the wheel balancer
Transportation and installation
•Transport and move the machine in the direction of the
figure.
Note when handover the machine
A、When transport the machine, be careful to avoid the
scratch and collide of the machine.
B、Carefully check if there are any damage or fault in
the process of transportation. Make the problems be
the report which will be sent to the carrier and make
mark and explanation on the goods handover
documents.
C、Check the construction of the machine and the data
on the nameplate of the product and the motor is
FIG 3